- Manufactured by Legend Fleet Solutions
- StabiliGrip is a 1/2" “composite blend”:
- Rubberized top surface with sandpaper texture
- TPO* cushioning layer
- Composite core with a fiber mesh
- TPO* bottom layer
- *TPO is a blend of thermoplastic, rubber, & proprietary materials
- Hard/firm floor (equivalent to that of a wood floor, with additional benefits)
- Maximum traction, even when floor/boots are wet
- Moisture resistant
- Helps prevent shifting of cargo during transport
- Dimensionally stable - will not expand/contract with temperature changes like plastic floors do
- Rot proof - will not rot or splinter & no issues with mold
- Chemical resistant
- Safe for food handling
- Decreases road noise
- Easy to clean
- Easy install - 118"WB is 2 pieces, 136"WB is 3 pieces, 159"WB is 3 pieces, 159"WB EXT is 3 pieces
- Seams are joined by an aluminum “H” channel; flooring is notched on the top for the channel, so that the channel is flush with the floor – a smooth seam
- D-ring cut-outs
- Rear and side sills highly recommended (see photo #3) - heavy-duty diamond plate aluminum / custom cut to fit
- Floor weights - 118"WB is 92 pounds, 136"WB is 101 pounds, 159"WB is 132 pounds, 159"WB EXT is 145 pounds
Install Tips!
- Tools Required: Rubber Mallet, Star Key Set (for removing/replacing factory tie downs)
- Remove existing floor mat (if any), sills (if any), and tie down rings (may be on floor or at bottom of walls). Place the first panel on floor in front, being sure it's right side up. Tap aluminum spline into dovetail on rear of first panel. Insert the second panel into spline and tap into place. Repeat for any additional panels. Replace sills and tie down rings. That's it! "Floating" floor is retained by vehicle walls and tie down rings. Note: kit includes all necessary hardware and vehicle specific installation instructions.
- Sill Installation (optional): Install floor. Install sills using either supplied push fasteners into factory holes or supplied screws into floor.
For installation instructions, please refer to our PDF download below.
Why should you buy the ProMaster Van StabiliGrip Composite Floor? Check out these common questions and answers about upfitting your van.
Is the Composite Floor Slip-Proof?
The StabliGrip comes with maximum traction. Each surface minimizes slip hazards, even when your shoes and flooring are wet. The rubber top reduces the risk of cargo shifting for better protection and focus while driving.
Is the Surface Designed for Durable Use?
This composite floor provides impressive durability and maintains its professional appearance with the following benefits:
- Impact and puncture resistance: The StabliGrip stays consistent when you load heavy cargo and equipment or drop a tool.
- Temperature resistance: The materials are dimensionally stable, so they don't expand or contract in extreme temperatures.
- Chemical resistance: The flooring withstands many chemicals, including battery acid, diesel fuel and hydraulic oil.
- Moisture resistance: The surface doesn't become moldy or break down in damp or wet conditions.
Can You Use This Product as a Work Surface?
This flooring design makes an ideal work surface when using supplies, tools or equipment in your ProMaster van. The flat surface is easy to work on, so you can increase your work efficiency and productivity. The flooring stays the same with durable use and is easy to clean as needed.
